Addressable Optical Smoke Detector ND-751P-E
The smart Notifier N6000 fire detector features a flat design, is compatible with the central panel, self-adjusts to the environment (temp, humidity, dust), is addressable, has 10 sensitivity settings, LED display, and high anti-interference signal.
General Description
- Distinctive appearance, low-profile design
- Compatible with the Notifier N6000 fire panel, offering superior addressing and communication capabilities compared to conventional alarm lines
- Has environmental balancing capability. Automatically adjusts the alarm threshold according to the installation location's environment, such as temperature, humidity, dust... This helps its sensitivity remain unchanged when the environment changes.
- Sensitivity can be set for the detector from the central panel with 10 setting levels
- The LED light can be set to display mode and will flash when there is a fire signal
- Stable signal with high anti-interference function
Technical Specifications
- Operating Voltage: 15 – 32 VDC
- Operating Temperature: -10°C - 55°C
- Humidity: 10% – 95% RH, non-condensing
- Standby Current: maximum 450μA
- Alarm Current: maximum 3.5mA
- Dimensions: 102mm x 50mm (including base)
Notifier FCPS-24S8E 24V DC Auxiliary Power Supply Cabinet
The FCPS-24S8E (8A) provides a stable 24VDC filtered power supply to four output circuits for notification devices (bells, sirens, lights, etc.). Additionally, the four output circuits can be programmed with resettable or non-resettable modes.
Notifier PSE-6/PSE 24V DC Auxiliary Power Supply Cabinet
The PSE-6/PSE (6A) provides a stable 24VDC filtered power supply to four output circuits for notification devices (bells, sirens, lights, etc.). Additionally, the four output circuits can be programmed with resettable or non-resettable modes.
ISO-7-E Isolation Module
The isolator module protects SLC loops from short circuits by automatically disconnecting and reconnecting devices, featuring an integrated LED status indicator and high anti-interference capability.
MMX-7P-E Conventional Detector Monitoring Module
The MMX-7P-E module is used to connect conventional 2-wire detectors to the addressable fire alarm system. The module has an LED status indicator and ensures stable signals with high anti-interference capability.
24V CMX-7C-E Control Module
The Control Module features a modern, compact appearance, used to connect end-of-line fire alarm devices like horns/strobes. The device has an LED status indicator and ensures stable signals with high anti-interference.
CMX-7-E Combined Monitoring and Control Module
The Control/Monitoring Module features 1 monitoring input and 1 dry contact output, operating independently. It occupies 2 addresses, has an LED status indicator, and a stable signal with high anti-interference.
N6000 NIC-EC Fire Alarm Control Panel Communication Card
The NIC-EC communication card connects the Notifier N6000 fire panel to the N-NCS graphics software or to other N6000 panels. It supports twisted-pair wiring, has a speed of 10 Kbaud, and a range of up to 1500m.
MMX-7-E Monitoring Module
The monitoring module is used to supervise devices like flow switches, valves, normal emergency buttons, and conventional fire panels. It features an LED status indicator and ensures stable signals with high anti-interference.
SYS-HS Addressable Siren and Flashlight
The UL standard fire alarm horn strobe features a luxurious, aesthetic, compact, and easy-to-install design. The device has 3 volume levels, high/low display light settings, and flashes after 1 second.
SSM24-6 Addressless Alarm
The SSM24-6 Non-Addressable Bell is a 6-inch sounder operating at 24VDC, with a loud output (~82dB), used for wired fire/burglar alarm systems, featuring polarized design, easy installation, and reliability.
Addressable Siren and Light P700A-E
The P700A-E Addressable Horn Strobe is a fire alarm device combining sound (75-115 dB) and high-intensity light. It communicates addressably with the central panel, uses 24VDC power, and manages each device independently.
Addressable Fire Alarm Push Button M700K-E
The manual fire alarm call point is a single-action (break-glass), addressable device installed at entrances, exits, and stairways for easy activation during a fire. A key is required for restoration.
CHAU DUY PHAT COMPANY LIMITED
Email: sales@chauduyphat.com
Hotline: 028 35155101
Trụ sở: 204 No Trang Long, Ward 12, Binh Thanh District, HCMC
NEWSBOARD
Register as a member to receive news every day
@ Copyright belongs to Chau Duy Phat